kLite MICRO Dynamo USB Charger (Requires kLite Wiring Loom)

kLite MICRO Dynamo USB Charger (Requires kLite Wiring Loom) kLite MICRO Dynamo USB Charger (Requires kLite Wiring Loom). The design of the kLite Micro is "in line"--meaning that the wire loom input is on one side and the USB-A output is on the other. It can be placed in your top tube bag or simply zip tied to your handlebars in a way that makes charging access convenient to you. The device is waterproof, meaning that it can be used inside or outside of your bikepacking bags--provided you use a bit of dielectric grease on the USB-A ports to prevent surface rust. Avoid using dielectric grease on the yellow friction-fit kLite terminals, they are waterproof by design and the use of dielectric grease can cause the terminals to vibrate loose on the trail. Two versions of the kLite Micro are available: Rectangular Design 2" long by 0.5" wide Mass of 20g Mounts on bars, stem, or frameset with two zip ties (four included) Has red indicator light that shows charging state Tubular Design 22.2mm in diameter; can be used with a wide range of 22.2 bar mounts Ships with an aluminum 31.8mm handlebar mount Tube has carbon fiber design; is 3.25" in length Has red indicator ight that shows charging state Can be used with or without handlebar mount Ships with the Aluminum mount and a tube of dielectric grease 22g in weight; 46g including the aluminum mount Read Miles Arbour&&';;s review in Bikepacking.com here: https://bikepacking.com/gear/klite-micro-usb-charger-review/ Produced in Australia with a two year warranty. also available with a minimalist unswitched kLite wire loom: For Shimano / Shutter Precision dynamo hubs For SON dynamo hubs Accessories to consider: USB-A Y-Splitter - Split the charging output from the Micro to two devices using USB-A, also ships with a USB-A to USB-C converter